Top 10 Best Ptp Wireless Bridge To Buy In 2022

There is a large market for ptp wireless bridge, and there are a lot of similar products available. To make the decision about which one to buy, it can be challenging as you have to screen through so many options. Weï’ve taken care of all of your requirements and put together 10 top rated best ptp wireless bridge that you can consider. These resources will not only do you good but will save you money as well.

A Shortlist Of The Best Ptp Wireless Bridge

Take a look at the following comparison chart of our top 10 best ptp wireless bridge that will win your heart.

10 Best Ptp Wireless Bridge People Love In 2022: In Depth Features

Bestseller No. 1
TP-Link 2.4GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 9dBi, 5km+ | Passive PoE Powered w/ Free PoE Injector | Pharos Control (CPE210)
  • Built in 9dBi 2x2 dual polarized directional MIMO antenna
  • Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable
  • System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)
  • TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance
  • Centralized management system Pharos Control
Bestseller No. 2
CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Adapter
  • GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
  • Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
  • Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.
Bestseller No. 3
KuWFi 2-Pack Wireless Ethernet Bridge, Long Range WiFi Access Point 5.8G Outdoor AP CPE Kit Supports 2-3KM for PTP/PTMP
  • 【What KuWFi CPE200M is】an 11AC 5GHz 900Mbps point to point wireless bridge outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 2-3KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200M’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200M gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 2-3KMdistance. It transmits via wireless WiFi, reducing the trouble of wiring cable
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Bestseller No. 4
5.8GHz Outdoor Wireless Bridge Point to Point Access PTP/PTMP Plug & Play CPE Network 300Mbps 1.2ML Long Range WiFi Extender with 12DBI High Gain Antenna,POE Power Adapter
  • [Point to Point Wireles Bridge]:CPE355 is a 5.8G long range wifi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability.The 5.8G wireless bridge outdoor is capble sharing internet to remote location up to 2KM(Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process.It is a simple,easy and professional way for long range wireless coverage,data transmit,wireless monitoring.
  • Easy to Installation - Pre-configured CPE Kit with build in 10dBi panel antenna, the transmit/receive (point to point )wireless distance more than 1-2KM meters.suitable for long range video transmission point to point wifi cover, It support Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode ,no need seting , it can work two unit at the same time , no need long cable for connect to camera with your PC
  • Long Range Transmission Distance - Up to 2km (visible unobstructed environment), actual application distance should be less than 2KM. Built-in 10DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house
  • Widely Applications - Any place required cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitornetworks. Outdoor CPE Connect an IP Wireless Camera to a secondary port and utilize its long-range connectivity to send video back through the wireless network for extended coverage
  • Built for Outdoor Wi-Fi Coverage - IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold,heat or continuous moisture.Lightning Protection,Waterproof,Dustproof,Antifreeze,High-Temperature Resistant, With software-enabled PoE output,the secondary Ethernet port can power an external device,such as a PoE security camera,for seamless IP video integration
Bestseller No. 5
KuWFi 2-Pack 300Mbps Wireless Outdoor CPE Kit Point to- Point Wireless Access Point 2.4G WiFi Bridge Supports 1KM Transmission Distance Solution for PTP/PTMP (Pre-Program)
  • 【What CPE120 is】KuWFi CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode, for different network environment】 Point to Point/Multi-Point(1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to internet bridge CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi line of sight wifi bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
SaleBestseller No. 6
MokerLink WiFi Bridge, Wireless Outdoor CPE for PtP and PtMP Transmission, 5.8GHz 900Mbps 2-3KM Distance, with PoE Adapter, 2 Ethernet Port, 2 Pack
  • This Wifi Outdoor Bridge works at 5.8Ghz band, built-in 12dbi antenna, Max 900Mbps between the bridge, support 2-3KM long-distance wireless transmission, automatically adjust the transmission power and channel, reduce signal interference, make wireless transmission more stable
  • The installation is very simple. It is powered by a 24V poe adapter(included) and supports dial pairing. Set one of the CPE DIP switches to H, set it host and transmit the signal; and set the other CPE switch to C, set it slave client and receive the signal; then reset, will automatically complete pairing, no other configuration required. There are two 100Mpbs Ethernet ports, the WAN port connect to the POE Adapter POE Port, the LAN port connect to the LAN device.
  • Full information LED display, include host-client mode(H or C,the number behind is the channel number), signal strength(P,a number will be displayed after the pairing is successful), IP address(A), port /wifi/power led, the F button can switch the LED display info, the S button can complete the setting, more clearly know the device status, more conducive to debugging and maintenance
  • Built-in independent hardware protection circuit and watchdog chip, when working abnormally, it will automatically restart to maintain the continuity of wireless coverage; support WEB GUI management, view operating status, support wifi analysis and configuration
  • Professional outdoor shell design, seamless molding, IP65 dustproof and waterproof, lightning protection, support PtP, PtMP(1-4); Also support one single independent use, both set at the Host mode, with complete AP function, used for wifi access, maximum support 50+ users. It can be widely used indoor and outdoor, for home, enterprise network, wireless coverage, security monitoring transmission, great for expanding your network wirelessly.
Bestseller No. 7
5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Power Supply 2 Pack
  • Bluedery CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
  • PTMP Pre-programmed: simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pairing and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired succeeded. Great for extend the internet to your garage, barn, store, and warehouse through 5.8Ghz wireless transmission, instead of complicated wire connection.
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 1.2 miles transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
  • Point to Point Mode: Connect the both wireless bridges to the PoE power adapter will auto pair, no need connect to computer for the complicated configures, at point-to-point mdoe can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 1.2 miles in 60 a degree angle of the front direction.
  • Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, in this way you can management different building's IP cameras in one system without wiring, you have to connect to computer to configure the master and slave bridge which need some internet knowledge.
Bestseller No. 8
EnGenius Technologies Wi-Fi 5 Outdoor AC867 5Ghz Wireless Access Point/Client Bridge, Long Range, PTP/PTMP, IP55, 26dBm Transmit Power with 19dBi Directional Antennas, GigE Port (EnStation5-AC Kit)
  • [Wi-Fi 5 Device] Capable of speeds up to 867 Mbps on 5 GHz, 3x faster than N300 bridges
  • [Plug & Play Installation] Simple set up via EnWifi app or web browser
  • [High User Capacity] MU-MIMO improves performance & increases user device capacities
  • [Unrivaled Power] High 26 dB transmit power extends Wi-Fi to yard or building-to-building
  • [Built for Distance] High gain 19 dB integrated directional antennas extends wireless networks up to 5 miles point-to-point or point-to-multipoint
Bestseller No. 9
Wireless Bridge Point to Point for 5KM Remote Transmission, 5G WiFi 900Mbps Outdoor CPE PtP & PtMP with 15dBi High-Gain Antenna and 1000M Ethernet Port 48V PoE, Support 50+ Client Devices, 2 Pack
  • 🚀【Up to 900Mbps Data Rate】Equipped with 1000M Ethernet port and 2*2 MIMO Antenna, it provides higher speed for all users to ensure that you have access to better WiFi service.
  • 🌌【Wider WiFi Coverage-5KM】Build in a up to 500mW power amplifier and a 15 dBi MIMO high-gain antenna, which greatly improves the coverage and WiFi signal stablity. Support 50+ client users.
  • 🏤【Multiple Applicable Scenarios】5G outdoor CPE supports AP/repeater operation mode and PoE/DC power supply mode to meet a variety of long-distance wireless transmission needs, such as buildings, factories, rural areas, construction sites, squares, elevators and other places.
  • ❤️【Reliable Warranty Service】The wireless bridge CPE has a 30-day money-back guarantee, 2-month free replacement,1-year manufacturer warranty and professional technical support. If you need any help, pls contact us through Amazon email.
Bestseller No. 10
Cambium Networks ePMP Force 180 Bridge-in-a-Box Plug-n-Play Outdoor Wireless Ethernet Bridge - Pre-paired Point-to-Point (PTP) link - 10 Mile Wireless Range - 5GHz - 200 Mbps Throughput (C058900B072A)
  • INDUSTRIAL-GRADE PLUG-N-PLAY OUTDOOR WIRELESS ETHERNET BRIDGE: The two pre-paired Force 180 5 GHz units use ePTP proprietary protocol to support longer ranges, lower latency and deliver greater performance.
  • 10 MILE RANGE WITH UP TO 200 MBPS THROUGHPUT: Quickly support any application requiring network extension. Extend your local network to a remote building or extend your Wi-Fi link to another location.
  • COST-EFFECTIVE SOLUTION FOR WIRELESS BACKHAUL: Easily and securely transmit data from CCTV/Security networks and self-install cameras. Our tamper-resistant ePMP units won't back down to interference.
  • INTEGRATED SECURITY FEATURES: Built-in 128 bit AES military-grade data encryption and RADIUS-based authentication ensures that your data is always protected when using the wireless bridge system.
  • INCLUDES EVERYTHING YOU NEED: Each box contains 2 pre-paired ePMP Force 180 devices with integrated 16 dBi patch antennas and gigabit Ethernet ports, adjustable mounting brackets and set-up instructions.

What To Look For Before Buying Best Ptp Wireless Bridge

Take the following considerations into account to choose the best ptp wireless bridge that meets your needs.

The first step is to determine what your needs are. Once you know what you need, it’s time to start finding the right product.

The type of product you wish to buy is the second thing to think about. Do you prefer a product that is simple to use or one that is more complicated? Are you looking for something tiny or something big? When it comes to picking the best product for your needs, these are all vital factors to consider.

What are the specific features that I need? 1. You need a product that is comfortable and easy to use. 2. You need a product that is able to handle a lot of wear and tear. 3. You need a product that can last for a long time. 4. You need a product that is affordable. 5. You need a product that is effective and convenient.

There are numerous advantages to a certain product. On the product’s website, you’ll find a list of advantages. There are, however, several products that offer distinct benefits not found in other goods. Some items, for example, include antioxidants that can help lessen the risk of cancer. Other products contain substances that aid in the improvement of sleep quality or cognitive function.

Conclusion

We chose ptp wireless bridge based on these factors. Is that where our method ends? No way. The most crucial thing you should know about us is that we constantly update our website to ensure that you have access to up-to-date and relevant information. We have a last layer of filtration because reader pleasure is paramount to us. And one of them is you, the reader! If any of the ptp wireless bridge listed here are wrong, irrelevant, out of date, or simply outdated, please let us know. Your suggestions are always appreciated, and we’ll do our best to update our list as soon as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *